Iron Pillar Of Delhi

7.3K 63 4
                                    

Dedicated to Hardik for being just so wonderful and sweet. 

.................................................

Iron Pillar Of Delhi: 

Standing at the center of the Quwwatul Mosque the Iron Pillar is one of Delhi's most curious structures. Dating back to 4th century A.D., the pillar bears an inscription which states that it was erected as a flagstaff in honour of the Hindu god, Vishnu, and in the memory of the Gupta King Chandragupta II (375-413).

How the pillar moved to its present location remains a mystery. The pillar also highlights ancient India's achievements in metallurgy. The pillar is made of 98 per cent wrought iron and has stood 1,600 years without rusting or decomposing.

Take the case of the Brahmi inscription alone. Readings of this six-line, three-stanza inscription in Sanskrit verse vary considerably, the one most often published being that by Fleet, who translated it in 1888.

It speaks, in very poetic terms, of the powerful, all-conquering monarch who had the pillar made: "He on whose arm fame was inscribed by the sword, when in battle in the Vanga countries, he kneaded (and turned) back with (his) breast the enemies who, uniting together, came against him; … he, by the breezes of whose prowess the southern ocean is even still perfumed."

But, this eloquent panegyric apart, when it comes to identifying the king with clarity, and giving further details about the erection of the pillar, the inscription suddenly leaves some questions unanswered: obviously, not for those who lived in those early times, but for later generations, for whom so much information was lost in the centuries that have gone by.

Thus, the verse concludes with the words: "He who, having the name of Chandra, carried a beauty of countenance like (the beauty of) the full moon, having in faith fixed his mind upon (the God) Vishnu, (had) this lofty standard of the divine Vishnu set up on the hill (called) Vishnupada."

But who exactly was King Chandra remains a puzzle.

On other grounds, historical or paleographic, it can be concluded that the pillar belongs to the Gupta period, but, from among the imperial Guptas, who is it that is referred to here simply by the name of 'Chandra': Chandragupta I, Chandragupta II, also celebrated as Vikramaditya, or, as some firmly believe, Samudragupta? Again, the Guptas were known to have been devotees of Lord Vishnu, but where was this hill called 'Vishnupada' located?

In a report published in the journal Current Science, R. Balasubramaniam of the IIT Kanpur explains how the pillar's resistance to corrosion is due to a passive protective film at the iron-rust interface.

The presence of second-phase particles (slag and unreduced iron oxides) in the microstructure of the iron, that of high amounts of phosphorus in the metal, and the alternate wetting and drying existing under atmospheric conditions are the three main factors in the three-stage formation of that protective passive film.

Many theories have been put forward from time to time to explain the rust-free state of the pillar.

For example, the site of the pillar is away from industrial areas and the climate of Delhi is fairly dry.

It is known that serious corrosion of iron does not take place if critical value of relative humidity is less than 80%. At Delhi, the relative humidity exceeds 80% for only about 20 days in a year and exceeds 70% for only about 65 days in a year. Therefore, although the total rainfall annually is about 15-30 inches the atmosphere in Delhi is not very conducive to rusting of iron.

Besides a dry environment, there appears to be no doubt that the protective scale on the pillar has played a major role in protecting this monument. There are two major theories of formation of this protective scale. It is quite possible that both the factors have played equally important roles in formation of this scale.

According to the second theory, the protective oxide could have formed from atmospheric exposure. Examination of small pieces of scale obtained from the iron pillar reveals that it consists of approximately 80% of an oxide of iron having the properties of the solid solution phase of mixtures of FeO and Fe2O3. About 10% of this hydrated oxide of iron, approaching Limonite (Fe2O3.3H2O) has also been reported. From the above reports it can be concluded that the scale was apparently formed under conditions of heating with significant extent of atmospheric oxidation occurring at the surface and penetrating along cracks running longitudinally in the scale.

There have also been suggestions that the past pillar was ceremonially anointed with purified butter. Ghee obtained from the milk of cow would have had a marked effect. A thin coating of linseed oil or lanoline or wool grease is well known to give good protection to steel for some months. If applied regularly and reinforced b the dust and sand which settle on it, it gives a good protective coating to the material underneath. However, the practice of ceremonial anointing would probably have been discontinued during Muslim occupation of the area in 12th century AD. 

So, in brief, it can be concluded that the corrosion resistance property of the Delhi Pillar is due to: (i) the purity of its iron; (ii) high phosphorus; (iii) low sulphur; (iv) absence of any other metal; (v) cinder coating formed on the surface; (vi) better forge welding; (vii) drier and uncontaminated atmospheric condition; and (viii) mass metal effect.

What exact processes were followed in forging it into shape at that early a point of time, the 4th/5th century AD? Above all, from the scientists' point of view, what is the secret, the great mystery, behind the fact of its being virtually non-rusting? There seems to be no end to the questions.

Strangest Mysteries of the World and Beyond !Where stories live. Discover now