A complete Manual guide for printer setup

2 0 0
                                    


If you've purchased the Canon mg3600 printer setup for office or home use, but aren't sure what to do to get the setup of the Canon mg3600 WiFi This article will assist you to learn everything you should be aware of.

The first thing you have to do is take the printer out of the box and arrange all of the components on a table. It is only necessary to connect the printer to the power source and begin connecting to the Canon printer. The first step is to begin by connecting all of the cables according to the directions that are provided in the manual for the printer.

You will be able to connect your printers with an automated connection. In this article, we'll review some of the most crucial instructions you need to be aware of for the Canon mg3600 configuration. So, let us begin!

Things to how to connect canon mg3600 printer to wifi?

There are certain things you must do prior to you install the Canon mg3600. Here's the checklist of things you need to take care of:

1. You must take the printer and its accessories from the box.

2. There are many elements that must be put together.

3. Read for the "Getting started" manual before you decide to create.

4. After connecting all components, connect the power wire using the AC socket.

5. It is essential to read the manual in depth and confirm whether the software is compatible with the device

Canon mg3600 wifi setup- WPS connection method

If your access device has the WPS button, then it is possible that the "WPS connection method" will work for you. It is an easy method to connect your Canon mg3600 to either a laptop or wifi. All you need to do is follow the steps provided in the following steps:

· The most important thing to do for the setup of the Canon mg3600 is to ensure that the printer is powered on and that the WPS switch on your wireless router remains on.

· Next step, press and hold the WiFi button of the printer until the light is turned on.

· Once you've done that, you'll need to follow"Black", the "Black" button, and then click on the "Wifi" button.

· After you have finished, it is important to ensure that the wifi light is flashing and the light appears to be lit.

· The next step is to click on the WPS button located at the access point in a few minutes.

· If you're finished, you'll see the blue light illuminated on the printer.

· The Power light and the WiFi light will flash after connecting to an access point.

· Once the printer is connected to the wireless successfully after which it will turn on the Power and the WiFi lights will cease to flash.

· When you've completed all the steps, then you must ensure that the wifi light, as well as that on light, is both lit.

Canon mg3600 wireless set-up Mac

These are steps you must follow to complete the Canon mg3600 configuration on Mac:

· The file can be downloaded from the folder where the file was saved and then check the settings on your computer.

· Double-tap the downloaded file, then put it in the Disk image. Disk image.

· Simply double-tap on"Setup." Double-tap on the "Setup" file to launch the setup screen.

· If you follow the instructions, we hope you will be able to easily set up the Canon mg3600 wireless setup mac connection.

· For more details on the steps, go to the canon.com/ijsetup site and seek assistance to complete the process.

Closing up:

If you've completed the canon mg3600 setup, you'll be able to attach your Canon MG3600 Printer to your Wifi/Computer wirelessly. Now you should be able to print using the printer.

Even after having completed all of the steps, if still encounter issues with the printer configuration, you may reach out to the customer support service team to find a solution to the setup of the Canon mg3600 or if you have any questions concerning the WPS pin on the printer of Canon.

PrinterWhere stories live. Discover now